Skip to Content

Telecom Device Battery Test Equipment GBT 1000

GBT 1000 Series : Telecom Device Battery Test Equipment

GBT-1000

Intro:

GBT 1000 is designed for testing batteries commonly used in mobile electronic devices. It applies high-speed pulse discharge to valid battery performance. The high-speed current response time not only allows for precise control of pulse duration, but also meets the international testing standards.

  • Support 8-phase pulse charge/ discharge with independent duration and current settings (in line with international pulse standards such as GSM and PWM)
  • Precisely record the pulse current and voltage variations of every phase
null
High-precision:±0.02% F.S.
null
Rapid data recording:1ms
null
level pluse: 8-phase / KHz
null
Discharge to 0V
ModelGBT 1000 Series
AC Power220VAC, 50/60 Hz, 1Φ
Loading Range
Charge
Discharge
 
0~20V*
0~20V*
Constant Voltage
Maximum
Resolusion
Accuracy
 
5, 20V
16 bit
± 0.02% F.S.
Constant Current
Maximum
Resolusion
Accuracy
 
± 10A*
16 bit
± 0.02% F.S.
Constant Power
Maximum
Resolusion
Accuracy
 
Depend on spec
16 bit
± 0.04% F.S.
Temperature
Range
Resolusion
Accuracy
 
-50~150°C
0.1°C
±1°C (-40~90°C)
Data Recording Time1s
Pulse Phase8
Pulse Time
Maximum Pulse Width
Minimun Pulse Width
Resolution
 
60s
500μs
50μs
Communication InterfaceCANBus (USB to PC)
Ambient23°C±2°C; 20~90 HR
Optional FeaturesAdvanced Data Analysis
AccessoryCustomized Fixture, Auto-Calibrator, Chamber

*Accept customized request

Advanced Data Analysis

With advanced data analysis feature, a variety of test data presentations could be adjusted according to the needs of researchers, such as text and graphical reports, self-defined X and Y-axis parameters on graphs and graphs zoom-in / zoom-out. It also helps researchers to easily analyze the data from cycle test. Data from each cycle can be superimposed and drew on a single chart to produce a lifecycle test report. Evaluating test results and finding variation are easy! Moreover, test data can be exported in csv format and manipulated in the third-party software that researchers are familiar with, improving the data usability.

Universal/ Customized Fixture

According to customer requests, CTE provides a variety of universal fixtures and customized fixtures.The universal fixture is specially designed for cylindrical and prismatic batteries. It is suitable for a wide range of battery specifications, and can be adjusted by customers to work with the batteries to be tested. The non-base plate design allows the battery to be lifted, reducing the thermal impact on battery test. Moreover, the removable battery compartment also makes changing battery convenient and flexible.For customized fixtures, please contact Chen Tech Electric.

Universal Fixture ApplicationCylindrical and Prismatic Batteries
Suitable Battery Size (mm)18~100W*52D*55H
Number of Battery Holders4~24
Loadable CurrentUnder 40A
Materials
Outer Frames
Battery Box
 
Stainless Steel
Bakelite
Size (mm)
Main Body
Battery Box
 
340W*423D*586H
319W*85D*239H

Auto Calibrator ACP2 Series

ACP is especially designed to improve the efficiency and precision of calibration for CTE test equipment. Its flexible and scalable design can be expanded to include up to 8 meters, thus ACP is capable of calibrating 8 testing channels simultaneously, which greatly reduces labor cost and time. Also, removable shunts and meters are built-in, making it easy to calibrate and maintain.

ModelACP2 N Series
AC PowerAC 110/ 220V
Applicable SpecUnder 20V/ 3~20A

Auxiliary Voltage/ Auxiliary Temperature

Auxiliary voltage and auxiliary temperature are for collecting the voltage and temperature data of a single cell in the battery pack. Collected data can be used as step cutoff conditions while running the battery test, improving the flexibility of the production line and laboratory.

ET-100B
ES-100B Auxiliary Voltage
Channels24
Measurement Range±64V, ±32V, ±8V
Measurement Resolution16 bit
Measurement Accuracy0.02% F.S.
Data Recording Time100ms (24ch)
Auxiliary TemperatureET-100BET-100C
Channels246-16
Measurement Range-50~125°C*-265~1260°C*
Measurement Resolution0.1 °C0.001°C
Measurement Accuracy±1°C (-40~90°C)±0.1°C
Data Recording Time24ch/100ms4ch/s
Supported typeThermistorThermocouple, RTD, Thermister, Diode

*Depend on chosen thermal sensors

Chamber

We collaborate with several 3-rd party chamber manufacturers such as Espec, Terchy, Giant Force, and TATO, and integrate their products into our system. Thus, users are capable of controlling chamber directly with iBest software.